Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE #3: Tue Apr 9 14:33:17 CEST 2013 jhs@lapr.js.berklix.net:/sys/amd64/compile/LAPR.small amd64 CPU: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (2128.42-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x20652 Family = 6 Model = 25 Stepping = 2 Features=0xbfebfbff Features2=0x98e3bd AMD Features=0x28000800 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = 3221225472 (3072 MB) avail memory = 2766884864 (2638 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 5 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded cryptosoft0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x3050-0x3057 mem 0xb0000000-0xb03fffff,0xa0000000-0xafffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 131068k stolen memory pci0: at device 22.0 (no driver attached) ehci0: mem 0xb4405c00-0xb4405fff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 hdac0: mem 0xb4400000-0xb4403fff irq 22 at device 27.0 on pci0 pcib1: at device 28.0 on pci0 pcib1: failed to allocate initial prefetch window: 0xb0400000-0xb13fffff pci1: on pcib1 bge0: mem 0xb3400000-0xb340ffff irq 16 at device 0.0 on pci1 bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 70:5a:b6:46:f3:38 pcib2: at device 28.1 on pci0 pcib2: failed to allocate initial I/O port window: 0x1000-0x1fff pci2: on pcib2 pci2: at device 0.0 (no driver attached) ehci1: mem 0xb4405800-0xb4405bff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib3: at device 30.0 on pci0 pci3: on pcib3 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x3048-0x304f,0x305c-0x305f,0x3040-0x3047,0x3058-0x305b,0x3020-0x303f mem 0xb4405000-0xb44057ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 pci0: at device 31.3 (no driver attached) pci0: at device 31.6 (no driver attached) pcib4: on acpi0 pci255: on pcib4 battery0: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range coretemp0: on cpu0 est0: on cpu0 p4tcc0: on cpu0 coretemp1: on cpu1 est1: on cpu1 p4tcc1: on cpu1 coretemp2: on cpu2 est2: on cpu2 p4tcc2: on cpu2 coretemp3: on cpu3 est3: on cpu3 p4tcc3: on cpu3 Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 20,33 and 25 on hdaa0 pcm1: at nid 24 on hdaa0 hdacc1: at cad 3 on hdac0 hdaa1: at nid 1 on hdacc1 pcm2: at nid 4 on hdaa1 usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: at usbus0 uhub2: on usbus0 ugen1.2: at usbus1 uhub3: on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: at usbus0 ugen1.3: at usbus1 uhub4: on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) SMP: AP CPU #2 Launched! cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 16628281 Hz quality 1000 uhub4: 4 ports with 4 removable, self powered ugen1.4: at usbus1 ukbd0: on usbus1 kbd2 at ukbd0 uhid0: on usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 ugen1.5: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:3:0:-1: Attached to scbus3 da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1909MB (3911679 512 byte sectors: 255H 63S/T 243C) ugen1.6: at usbus1 ums0: on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 Trying to mount root from ufs:/dev/ad4s3a [rw]... fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19 KLD linux_adobe.ko: depends on linux - not available or version mismatch linker_load_file: Unsupported file type bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop...Syncing disks, vnodes remaining...10 10 10 10 10 10 0 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0 done All buffers synced. Uptime: 11h58m45s usbus0: Controller shutdown uhub0: at usbus0, port 1, addr 1 (disconnected) ugen0.2: at usbus0 (disconnected) uhub2: at uhub0, port 1, addr 2 (disconnected) ugen0.3: at usbus0 (disconnected) usbus0: Controller shutdown complete usbus1: Controller shutdown uhub1: at usbus1, port 1, addr 1 (disconnected) ugen1.2: at usbus1 (disconnected) uhub3: at uhub1, port 1, addr 2 (disconnected) ugen1.3: at usbus1 (disconnected) uhub4: at uhub3, port 2, addr 3 (disconnected) ugen1.4: at usbus1 (disconnected) ukbd0: at uhub4, port 1, addr 4 (disconnected) uhid0: at uhub4, port 1, addr 4 (disconnected) ugen1.5: at usbus1 (disconnected) umass0: at uhub4, port 3, addr 5 (disconnected) (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 1 refs (da0:(pass2:umass-sim0:0:umass-sim0:0:0:0:0): removing device entry 0): passdevgonecb: devfs entry is gone ugen1.6: at usbus1 (disconnected) ums0: at uhub4, port 4, addr 6 (disconnected) usbus1: Controller shutdown complete ACPI Error: Unsupported register bit width: 0x0 (20110527/hwregs-130) acpi0: reset failed - AE_SUPPORT Rebooting... cpu_reset: Stopping other CPUs Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE #3: Tue Apr 9 14:33:17 CEST 2013 jhs@lapr.js.berklix.net:/sys/amd64/compile/LAPR.small amd64 module run already present! CPU: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (2128.42-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x20652 Family = 6 Model = 25 Stepping = 2 Features=0xbfebfbff Features2=0x98e3bd AMD Features=0x28000800 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = 3221225472 (3072 MB) avail memory = 2766643200 (2638 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 5 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded cryptosoft0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x3050-0x3057 mem 0xb0000000-0xb03fffff,0xa0000000-0xafffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 131068k stolen memory pci0: at device 22.0 (no driver attached) ehci0: mem 0xb4405c00-0xb4405fff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 hdac0: mem 0xb4400000-0xb4403fff irq 22 at device 27.0 on pci0 pcib1: at device 28.0 on pci0 pcib1: failed to allocate initial prefetch window: 0xb0400000-0xb13fffff pci1: on pcib1 bge0: mem 0xb3400000-0xb340ffff irq 16 at device 0.0 on pci1 bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 70:5a:b6:46:f3:38 pcib2: at device 28.1 on pci0 pcib2: failed to allocate initial I/O port window: 0x1000-0x1fff pci2: on pcib2 pci2: at device 0.0 (no driver attached) ehci1: mem 0xb4405800-0xb4405bff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib3: at device 30.0 on pci0 pci3: on pcib3 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x3048-0x304f,0x305c-0x305f,0x3040-0x3047,0x3058-0x305b,0x3020-0x303f mem 0xb4405000-0xb44057ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 pci0: at device 31.3 (no driver attached) pci0: at device 31.6 (no driver attached) pcib4: on acpi0 pci255: on pcib4 battery0: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range coretemp0: on cpu0 est0: on cpu0 p4tcc0: on cpu0 coretemp1: on cpu1 est1: on cpu1 p4tcc1: on cpu1 coretemp2: on cpu2 est2: on cpu2 p4tcc2: on cpu2 coretemp3: on cpu3 est3: on cpu3 p4tcc3: on cpu3 Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 20,33 and 25 on hdaa0 pcm1: at nid 24 on hdaa0 hdacc1: at cad 3 on hdac0 hdaa1: at nid 1 on hdacc1 pcm2: at nid 4 on hdaa1 usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: at usbus0 uhub2: on usbus0 ugen1.2: at usbus1 uhub3: on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: at usbus0 ugen1.3: at usbus1 uhub4: on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, SMP: AP CPU #2 Launched! ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 16628316 Hz quality 1000 uhub4: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.4: at usbus1 ukbd0: on usbus1 kbd2 at ukbd0 uhid0: on usbus1 Root mount waiting for: usbus1 ugen1.5: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:3:0:-1: Attached to scbus3 da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1909MB (3911679 512 byte sectors: 255H 63S/T 243C) ugen1.6: at usbus1 ums0: on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 Trying to mount root from ufs:/dev/ad4s3a [rw]... link_elf_obj: symbol in6_pcblookup_mbuf undefined linker_load_file: Unsupported file type fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19 ugen1.7: at usbus1 run0: <1.0> on usbus1 run0: MAC/BBP RT3572 (rev 0x0221), RF RT3052 (MIMO 2T2R), address e8:39:df:15:99:52 ugen1.7: at usbus1 (disconnected) run0: at uhub3, port 1, addr 7 (disconnected)