Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-PRERELEASE #88: Tue Jan 15 22:09:53 CET 2008 jhs@lapn.js.berklix.net:/usr/src/sys/i386/compile/JENERIC.small Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d29000. Calibrating clock(s) ... failed, using default i8254 clock of 1193182 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 133638482 Hz CPU: Pentium/P54C (133.64-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf real memory = 58720256 (56 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x00000000036c2fff, 40480768 bytes (9883 pages) avail memory = 43507712 (41 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: mem: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Jan 15 2008 21:59:02) hptrr: HPT RocketRAID controller driver v1.1 (Jan 15 2008 21:57:04) npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80004008 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00011066) pcibios: No call entry point pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1066, dev=0x0001, revid=0x04 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa400, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1066, dev=0x8002, revid=0x00 domain=0, bus=0, slot=6, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10c8, dev=0x0001, revid=0x01 domain=0, bus=0, slot=7, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 map[10]: type Prefetchable Memory, range 32, base 0x30000000, size 21, enabled found-> vendor=0x1095, dev=0x0643, revid=0x00 domain=0, bus=0, slot=8, func=0 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=14 map[20]: type I/O Port, range 32, base 0xfe00, size 4, enabled isab0: at device 6.0 on pci0 isa0: on isab0 vgapci0: mem 0x30000000-0x301fffff irq 15 at device 7.0 on pci0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfe00-0xfe0f irq 14 at device 8.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfe00 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ata1: [ITHREAD] unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed 0 unknown: status reg test failed 3c unknown: status reg test failed ff unknown: status reg test failed ff isa0: <3Com 3C509-TPO EtherLink III> at 0x300 in PnP mode! ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 TCM5095: adding irq mask 0x6a0 TCM5095: adding io range 0x210-0x3ef, size=0x10, align=0x10 PNP Identify complete pnpbios: 17 devices, largest 468 bytes PNP0a03: adding io range 0xcf8-0xcf8, size=0x1, align=0x1 PNP0a03: adding io range 0xcfa-0xcfa, size=0x1, align=0x1 pnpbios: handle 0 device ID PNP0a03 (030ad041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x37fffff, size=0x3700000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding io range 0x180-0x180, size=0x1, align=0x1 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1 PNP0200: adding io range 0-0x1f, size=0x20, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 4 device ID PNP0200 (0002d041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 6 device ID PNP0f13 (130fd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1 pnpbios: handle 8 device ID PNP0b00 (000bd041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 9 device ID PNP0c04 (040cd041) PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 pnpbios: handle 10 device ID PNP0e00 (000ed041) ESS0106: adding fixed io range 0x230-0x23f, size=0x10, align=0x1 ESS0106: adding fixed io range 0x388-0x38b, size=0x4, align=0x1 ESS0106: adding fixed io range 0x330-0x331, size=0x2, align=0x1 ESS0106: adding irq mask 0x20 ESS0106: adding irq mask 0x200 ESS0106: adding dma mask 0x1 ESS0106: adding dma mask 0x8 pnpbios: handle 11 device ID ESS0106 (06017316) PNP0501: adding irq mask 0x10 PNP0501: adding fixed io range 0x3f8-0x3ff, size=0x8, align=0x1 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0510: adding irq mask 0x8 PNP0510: adding fixed io range 0x2f8-0x2ff, size=0x8, align=0x1 pnpbios: handle 13 device ID PNP0510 (1005d041) PNP0401: adding irq mask 0x80 PNP0401: adding fixed io range 0x378-0x37f, size=0x8, align=0x1 pnpbios: handle 14 device ID PNP0401 (0104d041) PNP0700: adding irq mask 0x40 PNP0700: adding fixed io range 0x3f2-0x3f5, size=0x4, align=0x1 PNP0700: adding fixed io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding dma mask 0x4 pnpbios: handle 15 device ID PNP0700 (0007d041) ADP6360: adding irq mask 0x800 ADP6360: adding io range 0x140-0x15f, size=0x20, align=0x4 pnpbios: handle 20 device ID ADP6360 (60639004) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: strange result for test aux port (1). psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 73 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 73 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: [FILTER] sio1: irq maps: 0x1 0x9 0x1 0x1 sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: [FILTER] sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources (memory) unknown: at iomem 0-0x9ffff pnpid PNP0c01 on isa0 unknown: can't assign resources (port) unknown: at port 0x60 pnpid PNP0303 on isa0 unknown: can't assign resources (irq) unknown: at irq 12 pnpid PNP0f13 on isa0 unknown: failed to probe at port 0x61 pnpid PNP0800 on isa0 cbb0: at port 0x3e0-0x3e1 irq 5 pnpid PNP0e00 on isa0 device_attach: cbb0 attach returned 12 unknown: can't assign resources (irq) unknown: at port 0x230-0x23f,0x388-0x38b,0x330-0x331 irq 5 pnpid ESS0106 on isa0 unknown: can't assign resources (port) unknown: at port 0x3f8-0x3ff pnpid PNP0501 on isa0 unknown: can't assign resources (port) unknown: at port 0x2f8-0x2ff pnpid PNP0510 on isa0 unknown: can't assign resources (port) unknown: at port 0x378-0x37f pnpid PNP0401 on isa0 unknown: can't assign resources (port) unknown: at port 0x3f2-0x3f5 pnpid PNP0700 on isa0 unknown: failed to probe at port 0x140-0x15f irq 11 pnpid ADP6360 on isa0 ep0: <3Com 3C509B-TPO EtherLink III (PnP)> at port 0x210-0x21f irq 9 pnpid TCM5095 on isa0 ep0: using obsoleted if_watchdog interface ep0: bpf attached ep0: Ethernet address: 00:c0:4f:e0:26:cb ep0: [MPSAFE] ep0: [ITHREAD] Device configuration finished. procfs registered Timecounter "TSC" frequency 133638482 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached rr232x: no controller detected. hptrr: no controller detected. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ad0: 3909MB at ata0-master PIO4 ad0: 8007552 sectors [7944C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: Silicon Image check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ATA PseudoRAID loaded GEOM: new disk ad0 Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled sl0: bpf attached snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=10 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added cbb0: at port 0x3e0-0x3e1 irq 5 pnpid PNP0e00 on isa0 device_attach: cbb0 attach returned 12 pci0: driver added cbb0: at port 0x3e0-0x3e1 irq 5 pnpid PNP0e00 on isa0 device_attach: cbb0 attach returned 12 cbb0: at port 0x3e0-0x3e1 irq 5 pnpid PNP0e00 on isa0 device_attach: cbb0 attach returned 12 cbb0: at port 0x3e0-0x3e1 irq 5 pnpid PNP0e00 on isa0 device_attach: cbb0 attach returned 12 pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added cbb0: at port 0x3e0-0x3e1 irq 5 pnpid PNP0e00 on isa0 device_attach: cbb0 attach returned 12 pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added pci0: driver added cbb0: at port 0x3e0-0x3e1 irq 5 pnpid PNP0e00 on isa0 device_attach: cbb0 attach returned 12