DEPS += device.hints
DEPS += loader.conf
DEPS += XF86Config
DEPS += pccard.conf
DEPS += XFree86.0.log
DEPS += dmesg.today

all::	deps html

LAPL=	/host/lapl
deps:	${DEPS}

INST_FL=	-v -C -m 0644 
# for some reason the install line was not shown running, 
# (though it does run), so I added -v to ${INST_FL}

dummy:	
	@echo Testing /tmp/dummy
	if ( `test -f ${LAPL}/tmp/dummy` ) ; \
		then \
		echo "Yes1 ${LAPL}/boot/dummy" ; \
		echo "Yes2 ${LAPL}/boot/dummy" ; \
		install ${INST_FL} ${LAPL}/tmp/dummy boot/dummy ; \
		echo "Yes3 ${LAPL}/boot/dummy" ; \
	else	\
		echo "No ${LAPL}/boot/dummy" ; \
		echo "No ${LAPL}/boot/dummy" ; \
	fi

device.hints:	
	@echo Testing ${LAPL}/boot/device.hints
	if ( `test -f ${LAPL}/boot/device.hints` ) ; \
		then \
		install ${INST_FL} ${LAPL}/boot/device.hints boot/device.hints ; \
	else	\
		echo "No ${LAPL}/boot/device.hints" ; \
	fi

loader.conf:	
	if ( `test -f ${LAPL}/boot/loader.conf` ) ; \
		then \
		install ${INST_FL} ${LAPL}/boot/loader.conf boot/loader.conf ; \
	else	\
		echo No ${LAPL}/boot/loader.conf ; \
	fi

XF86Config:	
	if ( `test -f ${LAPL}/etc/X11/XF86Config` ) ; \
		then \
		install ${INST_FL} ${LAPL}/etc/X11/XF86Config etc/X11/XF86Config ; \
	else	\
		echo No ${LAPL}/etc/XF86Config ; \
	fi

pccard.conf:	
	if ( `test -f ${LAPL}/etc/pccard.conf` ) ; \
		then \
		install ${INST_FL} ${LAPL}/etc/pccard.conf etc/pccard.conf ; \
	else	\
		echo No ${LAPL}/etc/pccard.conf ; \
	fi

XFree86.0.log:	
	@# Probably content changes slightly after each X restart
	@# Not worth keep udating web just for that
	echo "Consider calling XFree86.0.log.manual"

XFree86.0.log.manual:
	if ( `test -f ${LAPL}/var/log/XFree86.0.log` ) ; \
		then \
		install ${INST_FL} ${LAPL}/var/log/XFree86.0.log var/log/XFree86.0.log ; \
	else	\
		echo No ${LAPL}/var/log/XFree86.0.log ; \
	fi

dmesg.today:	
	@# JJLATER potential privacy leak & dont need to keep updating
	echo "Consider calling next 2 lines manualy"
	echo "Consider calling dmesg.today.manual"

dmesg.today.manual:
	if ( `test -f ${LAPL}/var/log/dmesg.today` ) ; \
		then \
		install ${INST_FL} ${LAPL}/var/log/dmesg.today var/log/dmesg.today ; \
	else	\
		echo No ${LAPL}/var/log/dmesg.today ; \
	fi
	#vi var/log/dmesg.today 

.include <berklix.mk>